
Jacob Dillard
Microwave is amazing kitchen equipment to heat up your food very fast. Since microwaves become more and more accessible you can find them in every home or office. The microwave makes out life easier and more comfortable, and now, you probably can’t imagine your routine without it.
Unfortunately, all home appliances break down from time to time. One day you may run into the problem of the microwave oven acting up and not working as usual. In this article, we will discuss all possible components and issues related to microwaves. We hope it will help you to determine an issue and fix it yourself.
Remove the old light bulb from its housing and check it for any internal damages. Replacement light bulbs may be found in online stores. Make sure to get your model number and search for the right part.
Modern microwaves are equipped with self-diagnostic on board. While sometimes it may do mistakes, but generally the machine will tell you what part is causing an issue itself. Each error code has its own meaning and is related to different components. Simply look up your error code in a manual and compare it to what is displayed on your screen.
Magnetron is the main component that creates special rays to heat up your food. This part is usually the cause for the microwave not producing any heat and sometimes making a loud strange noise.
This kind of issue could be related to the magnetron or its protective shield. The shield is located in the top right corner inside of the heating compartment. Make sure the piece is not cracked and is solid. Also, sparks could be caused by a damaged inner paint layer that might have exposed the metal.
This issue could be related to buttons being dirty underneath and making bad contact with the board behind it or the membrane being bad itself. In most cases, the manufacturer sells the membrane and the control panel as one piece. So usually, it is pretty easy to remove and install it back yourself on most models.
The turntable is a glass round shaped disk on which your food sits on and rotates to evenly heat up. If your turntable does not turn, in most cases it could be the fuse protecting the turn motor or the motor itself.
The door has 3-5 hooks that latch the door shut. What most people do not know is that the door hooks also activate the safety switches behind the front panel. The front panel may be removed by unscrewing the screws below and pulling the display screen and buttons off. Make sure all switches have continuity and can be activated without affording.
The display may lose its brightness over time and looks dull. But don’t be tricked! It is not always the screen’s fault. Sometimes, it may be the connection between the board and the screen. The poor connection will direct enough power and make the screen dull or look completely off.
Oher inner components could be at fault depending on what type of appliance you have and how advanced it is. At this stage, we recommend getting an expert to look at the issue and give you a proper diagnosis.
If you are not completely sure that you are competent enough to solve the issue yourself, then simply give us a call and entrust everything to our team or professional masters. We will fix your microwave and get you back to your comfortable everyday regime before you have finished your breakfast.
Whether it’s late at night or early in the morning, we are here to serve you. The Appliance Care Service team processes your request 24/7 and will come to your place as soon as possible to fix any malfunctions.